Important Note; Glass Shelves; Refrigerator Drawers - Sub-Zero INTEGRATED REFRIGERATION Use & Care Manual

Integrated refrigeration
Hide thumbs Also See for INTEGRATED REFRIGERATION:
Table of Contents

Advertisement

STORAGE
Keeping Food At Its Best
This Sub-Zero features a unique dual refrigeration system to
keep food fresher longer.
With the Sub-Zero dual refrigeration system, individual
refrigerator and freezer systems have been designed to
maintain accurate, consistent temperatures and proper
humidity levels for longer food life expectancy. Dual refrig-
eration eliminates transfer of fresh food odors to frozen food
and ice and does not freeze the moisture out of the air in the
fresh food section.
For handy tips and information on how to maximize
food freshness, refer to the freshness cards stored in the
refrigerator.
|
4
English
Refrigerator Storage
DOOR SHELVES
To remove a door shelf or the dairy compartment, lift from
the bottom and slide out. To reinstall, place in the desired
position and slide the shelf down onto the guides. Refer to
the illustration below.

IMPORTANT NOTE:

If door opening is limited to 90°, door
shelves may need to be removed before removing a storage
drawer or glass shelf.
Door shelf removal.

GLASS SHELVES

To remove or adjust a glass shelf, tilt up, then lift up and out.
To reposition, insert shelf in the tracks along the back wall,
then lower the front until it locks into position. Refer to the
illustration below.
The stationary glass shelf at the bottom of the compartment
should be placed with beveled edge facing front. Rear sup-
port legs space the shelf away from the back wall to ensure
proper air flow through the unit.
IMPORTANT NOTE:
Use care when handling glass shelves to
prevent breakage or scratching the interior.
CAUTION
Glass shelves should warm to room temperature before
immersing in warm water.
Glass shelf removal.

REFRIGERATOR DRAWERS

To remove a refrigerator drawer, pull open until the drawer
stops. Lift the front of the drawer slightly and pull straight
out. To reinstall, pull drawer carrier out and align the bottom
of the drawer with the carrier. Refer to the illustration below.
Dividers in refrigerator drawers can be removed by pulling
straight up. To replace, align tabs on the divider with
notches in the drawer and push down.
Refrigerator drawer removal.
Refrigerator drawer removal.

Advertisement

Table of Contents
loading

Table of Contents