SATO TH208 Quick Manual page 19

Label issuing mode
Dimensions
Weight
Power specifications
Battery pack
Environmental conditions
(Temperature/Humidity)
Standard interface
Options
LED
Operation button
Paper length detection
sensor
Standard: Continuous mode, Dispenser mode, Tear-off mode,
Sensor off mode
Option: Cutter mode, Linerless mode (with cutter),
Linerless mode (without cutter)
132(W) x 194(D) x 147 (H) (mm) (5.1"W x 7.6"D x 5.7"H)
Approximately 1.7kg (Approximately 3.7lbs)
AC adapter
Manufacturer: SATO Corporation
Model name: PAH7020
Input power voltage: AC100V to AC240V ±10% (Full range)
Frequency: 50/60 Hz
Power consumption
Input power voltage conditions: AC 100V
At peak: 64.0VA/42.5W (at 30% printing ratio)
During standby: 12.6VA/6.2W
Battery type: Lithium ion battery
Manufacturer: SATO Corporation
Model name: PT/MB400-BAT
Rated voltage: 14.8V
Rated capacity: 1700mAh (TYP)
External dimensions: 43(W) x 20.4(D) x 109(H) (mm) (1.6"W x 0.9"D x 4.2"H)
Weight: Approximately 170g (Approximately 0.3lbs)
Charge cycle: Approximately 300 times
Charging time: Approximately 6 hours (Fully charged with the unit)
Approximately 1.5 hours by dedicated charger
Operating environment: 0 to 40°C (32 to 104°F), 30 to 80%RH (No condensation)
Storage environment: -5 to 60°C (23 to 140°F), 30 to 90%RH (No condensation)
(Not including labels and other supplies)
(1)USB (Full speed, USB version 2.0 compliant)
(2)Scanner connector (Supported PS/2)
(3)SD card slot
(4)FAT file system
Cutter unit, Linerless kit (w/cutter), Linerless kit (w/o cutter),
External label unwinder, External label rewinder (RW350),
Battery pack, Battery charger, SD card, Key cover,
Wall-mounting kit, 1D barcode scanner,
Full keyboard
CHARGE (Red)
Ten keypad: 0 to 9 (for alphanumeric characters and symbols input)
Function key: [
], [
[ ], [
Arrow key:
, , ,
I-mark sensor (Reflective type)
Gap sensor (Transmissive type)
], [ ], [F1], [F2], [ ], [
]
],
19