Advertisement
MANUAL-V2
FT06 R/C System
Mixture Functions of Helicopter
Model with Ordinary Gyro:
when A and B switches are up, channel 3 will control the mixture function of
channel 4 and 6.That is, when pushing channel 3 control rod, both the main
rotor's distance and the tail rotor's distance will be enlarged. So if the rotor
distance become nearer, you should only turn the reverse switch of the
corresponding channel.
Model with Special Functions Gyro:
Having the mixture functions of channel 4 will unlock the tail. So when this
happens, you can pulling A down and pulling B up.
Mixture Functions of Airplane's Flaperon
When B, E, F are down and D is up: the aileron uses two
servos. If you turn the channel 6 switch, the left and right
aileron can fluctuate at the same time. Pushing channel
1 rod to right-and-left direction can make the left and right
aileron differential.
6CH
1CH
The left aileron is connected to CH6 and the right one is
connected to CH1.
2CH
4CH
(4CH) (2CH)
7
User
Manual
Airplane's V-TAIL
When E, D are up and B, F are down: It is used in V-tail
aerocraft. CH2 elevator and CH4 rudder's mixture
function will cause the aerocraft to descend /ascend
or swerve.
FT06 R/C System
Mixture Function for Triangle Airplane
When B, F are down and D, E are up, it is used for triangle airplanes.
CH1
CH2
CH1 aileron and CH2 elevator are mixed together, which can make the
aircraft turn up, turn down and turn around.
FT06-B Function Introduction
This model is a popular model with 4 channels. It is mainly used
for airplane or helicopter with mixture functions.
The main functions are as follows：
(1) Channel 1, 2, 4 power adjusted functions.
(2) Standard 4 channel functions.
(3) At airplane state, channel 1 & 2 mixture function: Triangle wing (ELEVON).
(4) Channel 1, 2, 3, 4 reverse switch.
(5) Sound-and-light hint notification for low power: when the battery voltage is below 8.8V, the
power indicator light 1S/1S glitters and buzzes. And when it is below 8.3V, the power indicator light
0.5S/1S glitters and buzzes at the same time.
Switch Function Instruction:
(A) Turn up A, the movement of channel 1, 2, 4 is 100%, and
turn it down is small movement.
(B) Channel 1 & 2 mixture function: Triangle wing(ELEVON).
(C) Channel 1 is reverse switch for aileron. Pulling it down
is to make it in normal mode, and pulling it up is to make
it act in reverse.
1
2
3
4
(D) Channel 2 is reverse switch for elevator. Pulling it down
REV
△
is to make it in normal mode, and pulling it up is to make
▽
NOR
it act in reverse.
(E) Channel 3 is reverse switch for power. Pulling it down
is to make it in normal mode, and pulling it up is to make
( A ) ( B ) ( C ) ( D ) ( E ) ( F )
it act in reverse.
(F) Channel 4 is reverse switch for rudder, pulling it down is to
make it in normal mode, and pulling it up is to make it act in
Reverse.
User
Manual
8
Hide quick links:
Advertisement
