4 Replacement Procedures
4.6
RTC battery/LN board/3G card
Removing the RTC battery/LN board/3G card
To remove the RTC battery/LN board/3G card, follow the steps below and refer to Figure 4-
8 to 4-12.
1. Disconnect the LN board FPC from the connector CN9500 on system board and
connector CN9600 on the LN board.
CN9500
4-22
[CONFIDENTIAL]
LN board FPC
Figure 4-8 Removing the LN board FPC
PORTÉGÉ Z930/Satellite Z930 Maintenance Manual (960-887)
CN9600