Expansion Test - Toshiba PORTÉGÉ Z930 Maintenance Manual

Tests and Diagnostics

3.16 Expansion Test

To execute the expansion test, select 11 from the DIAGNOSTICS TEST MENU, press
Enter and follow the directions on the screen.
Subtest 01 PCMCIA wraparound [It is not supported]
CAUTION: PCMCIA wraparound test is not supported for this model.
NOTE: To execute this subtest, the PC card wraparound connector is required.
This subtest checks the following signal line of the PC card slot:
 Address line
 REG#, CE#1, CE#2 line
 Data line
 Speaker line
 Wait line
 BSY#, BVD1 line
This subtest is executed in the following order:
Sub# Address
01
02
03
04
05
NOTE: Select the subtest number01, The following message will appear:
Test slot number select (1:slot0, 2:slot1, 0:slot0&1)?
3-40 [CONFIDENTIAL]) PORTÉGÉ Z930/Satellite Z930
Good
00001 nn
00001 nn
00002 ww
00003 ––
00004 40,80
00005 nn
Bad Contents
xx Address line
xx REG#, CE#1, CE#2
nn=A0, 90, 80, 00
rr Data line
ww=write data, rr=read data
–– Speaker line
xx Wait line (40<xx<80)
xx Other lines (BSY#, BVD1)
NN=21, 00
Series Maintenance Manual (960-887)