Removing The Keyboard - Toshiba PORTÉGÉ Z930 Maintenance Manual

4 Replacement Procedures
4.12 Keyboard

Removing the Keyboard

To remove the keyboard, follow the steps below and refer to Figure 4-22.
1. Remove the aluminum tape (AL TAPE) from the back of the cover assembly. (Refer
to the NOTE of the Page.4-50)
2. Turn the cover assembly face up and peel off the keyboard adhered to the insulator.
3. Peel off the insulator (INSU KB) from the cover assembly.
NOTE: Do not reuse the removed keyboard and INSU KB. Be sure to use new keyboard
and KB insulator.
Insulator
(INSU KB)
4-48 [CONFIDENTIAL]
Keyboard
Figure 4-22 Removing the keyboard
PORTÉGÉ Z930/Satellite Z930 Maintenance Manual (960-887)