Chiller Operation Control; Changing Display Unit; In Gathering Information Process; Gathering Information Completed - Acson A5ACV 30 CR User Manual

6.2 CHILLER OPERATION CONTROL

6.2.1 STARTING
During power on for the Chiller Panel, it needs to take several times to collect information from the Chiller.
At this time, all the status will show "--". Please ensure the particular Chiller exists in the network. When
the process is completed, user can start to control the Chiller using the panel.
01/01/2000 01/01/2000
Status Status
Mode Mode
Cool Temp Cool Temp

In gathering information process

6.2.2 CHANGING DISPLAY UNIT

Chiller Panel (Master) can choose to choose to control / display each Chiller status. This can be done in
[Summary Pages] only.
01/01/2000
Status
Mode
Cool Temp
Unit Selection
Select All
Select One
Unit Selection
Select All
Select One
12:00am 12:00am
: -- : --
: -- : --
: -- : --
[00] [00]
12:00am
: ON
: Cooling
: 12
:
: 0
:
: 0
01/01/2000
Status : ON
Mode : Cooling
Cool Temp : 12°C

Gathering information completed

In [Summary Pages], press and hold ENTER buttom
(1 second) to go into [Unit Selection] menu.
Select "Select All" and press ENTER if user want to
control all Chilelr in the network, or select "Select One"
to control a particular Chiller. Press ESC to exit to
[Summary Pages].
Select a Chiller ID via UP or DOWN and press ENTER
to confirm or ESC to cancel.
22
12:00am
[00]