The Electrolux Group. The world’s No.1 choice. The Electrolux Group is the world’s largest producer of powered appliances for kitchen, cleaning and outdoor use. More than 55 million Electrolux Group products (such as refrigerators, cookers, washing machines, vacuum cleaners, chain saws and lawn mowers) are sold each year to a value of approx.
Safety precautions CAUTION! Use this unit properly in order to avoid injuries. Follow the instructions and precautions for reasonably safe, efficient use of the product. It is the responsibility of the user to follow the instructions and precautions provided in the manual supplied with the product. Note the illustrations at the beginning of the manual.
B. General safety rules WARNING! The saw is intended only for the cutting of wood The engine group is intended only for use with the recommended cutting equip- ment. WARNING! The saw can be dangerous. Improper use can cause injuries or even fatalities to the user or others.
C. Safety devices WARNING! Never use the saw if the safety devices are defective or damaged. Follow the instructions for checks, maintenance and service. Your saw is equipped with the following security devices: The KICKBACK can be produced if the end part of the bar makes solid contact with the wood or other object.
Chain”) Always execute correct maintenance for the bar and C5. LESSENING VIBRATIONS chain (see chapter “Maintenance”). The saw is equipped with a vibration damping system that develops during the use of the saw. ATTENTION! Never use the saw without the The antiquiver system reduces vibration propagation chain catcher.
without the specifications expressedly shown Always check that there are no fuel losses. in this manual, can cause serious damage to the engine! CONSERVATION OF FUEL The petrol is highly flammable. Keep it in a cool, well-aired 2. Prepare the mixture in a clean can, homologated for the environment stored in a container homologated for this petrol.
COLD ENGINE STARTING 4. When the motor has started, press and release the accelerator immediately so as to unlock it from the starting ATTENTION! During starting, give maximum position. attention to the movement of the chain. Let the engine heat up for not less than 10 seconds, warming the machine up allows for better cutting performance.
USE OF THE SAW G7. Disbranching before cutting and withdrawal path The following list is a theoretical disquisition regarding the For disbranching operations the same principles apply as most common situations one using the saw must face. they do for normal cutting. 1.
For the pulling down of a tree we recommend using a bar G10. DISBRANCHING longer than the diameter of the trunk, so as to be able execute ATTENTION! Most accidents caused by saw the DIRECTIONAL and FALLING cuts with a SIMPLE CUT KICKBACK happen during the disbranching (see “technical characteristics”...
I1. Brake chain with antiKICKBACK protection 2. Press the throttle trigger lockout device and check that it goes back to rest position as soon as it’s released. ATTENTION! Do not dismantle or tamper with 3. Check that the accelerator and the accelerator block move the chain brake mechanism under any freely and that the recall springs work correctly.
The exact height must be 0,025”/0,65 mm beneath the upper Fuel Filter To replace remove the tank cap and extract the filter using a cutting edge. metal hook. Replace the filter, preferably at least once a year. Check the height using the file and file down the jutting part. Round the front part of the delimiter (D).