Operations - Clarion CMS2 Owner's Manual

5. OPERATIONS

Basic Operation
Note: Be sure to read this chapter referring chapter
"4. CONTROLS"
CAUTION
When the unit is turned on, starting and stopping
the engine with its volume raised to the maximum
level it may cause hearing damage. Be careful
about adjusting the volume.
Turning on and off the power
Note:
Start the engine before using this unit.
Be careful about using this unit for a long time without
running the engine. If you drain the vessel battery too
far, you may not be able to start the engine and this
can reduce the service life of the battery.
1. Start the engine. The power button / knob illumination
on the unit will light up.
2. Press the [ ] power button to turn On or Off the
power.
Selecting a mode
1. Press the [ SRC ] button to display source menu.
* External equipment not connected to this unit is not
displayed.
Adjusting the volume
1. Press VOL+ button to increase the volume.
2. Press VOL- button to decrease the volume.
CAUTION
While boating, please be aware of the volume levels
in residential, family areas and local volume level
ordinances.
Engine ON
position
Mute
Press the [MUTE] button to turn the mute On and Off.
Display OFF/ON
This feature will allow the user to turn the display OFF
in the event the display is too bright in different lighting
conditions.
To use this feature, please follow these steps:
1. To turn the display OFF, Press and release the Power
Button and the display will turn OFF, but the audio from
the current source will continue to play.
2. To turn the display ON, Press and release the Power
Button and the display will turn back ON.
**With the display OFF, the ability to change tracks and
adjust volume will still remain.**
7
CMS2