F4.3: Right Voice Octave Shift; F4.4: Left Voice Octave Shift; F4.5: Right Voice Effect Depth; F4.6: Left Voice Effect Depth - Yamaha Clavinova CLP-880 Owner's Manual

The Function Mode
g
F4.3: Right Voice Octave
Shift ...........................................................................................,..........
D
F4.4: Left Voice Octave Shift ..........................................................................................................
Depending on which voices you combine using the split mode, the combination may sound
better if one of the voices is shifted up or down an octave. Use the [-/NO] and [+/YES]
buttons to set the octave of the Left or Right Voice as required. The available settings are "0"
for normal pitch, "-1" to shift the pitch down one octave, and" 1" to shift the pitch up one
octave. Press the [-/NO] and [+/YES] buttons simultaneously to recall the default setting
(different for each voice combination).
Set according to the pitch extent for the song you want to play.
g
F4.S:
Right Voice Effect
Depth ......................................................................................................
DJ
F4.6: Left Voice Effect Depth ..........................................................................................................
These functions make it possible to individually set the depth of the effect for the Left and
Right split-mode Voices. Use the [-/NO] and [+/YES] buttons to set the effect depth for the
corresponding voice as required. The depth range is from 0 through 20. A setting of "0"
produces no effect, while a setting of "20" produces maximum effect depth. Press the [-INO]
and [+/YES] buttons simultaneously to recall the default setting (different for each voice
combination).
~
NOTE
I .
The effect depth settings cannot be changed unless the EFFECT is ON. The Function mode must be
exited before EFFECT can be turned ON.
D
F4.7:
Damper Range ................................................................................................................................
The Damper Range function determines whether the damper pedal affects the Right Voice,
the Left Voice, or both the Left and Right Voices in the split mode. Use the [-/NO] and [+1
YES] buttons to select "2" for the Left Voice, "1" for the Right Voice, or "ALL" for both
voices. Press the [-/NO] and [+/YES] buttons simultaneously to recall the default setting
"ALL".
DJ
F4.8: Reset .........................................................................................................................................................
j
This function resets all split-mode functions to their default values. Press the [+/YES]
button to reset the values.
"E
,..,d" will appear on the display when all functions have been
reset.