F3 Dual Mode Functions; F3.1: Dual Balance; F3.2: Dual Detune; F3.3: 1St Voice Octave Shift - Yamaha YDP-101 Owner's Manual

The Function Mode
F3
Dual Mode Functions
mode, then use the FUNCTION [<] and [>] buttons to select the desired dual mode func-
tion, as listed below.
functions cannot be selected. If this happens engage the Dual mode and proceed.
I SHORTCUT: You can jump directly to the dual-mode functions (F3) by pressing the

F3.1: Dual Balance

quired by using this function. Use the [–/NO] and [+/YES] buttons to adjust the balance as
required. The balance range is from 0 through 20. A setting of "10" produces equal balance
between the two dual-mode voices. Settings below "10" increase the volume of the 2nd Voice
in relation to the 1st Voice, and settings above "10" increase the volume of the 1st Voice in
relation to the 2nd Voice ("1st" and "2nd" is explained on page 15). Press the [–/NO] and [+/
YES] buttons simultaneously to recall the default setting (different for each voice combina-
tion).

F3.2: Dual Detune

thicker sound. Use the [–/NO] and [+/YES] buttons to set the amount of detuning as required.
The detune range is from –10 through 10. A setting of "0" sets both voices to the same pitch.
Settings below "0" increase the pitch of the 2nd Voice in relation to the 1st Voice, and settings
above "0" increase the pitch of the 1st Voice in relation to the 2nd Voice ("1st" and "2nd" is
explained on page 15). Press the [–/NO] and [+/YES] buttons simultaneously to recall the
default setting (different for each voice combination).

F3.3: 1st Voice Octave Shift

F3.4: 2nd Voice Octave Shift

better if one of the voices is shifted up or down an octave. Use the [–/NO] and [+/YES]
buttons to set the octave of the 1st or 2nd Voice as required ("1st" and "2nd" is explained on
page 15). The available settings are "0" for normal pitch, "–1" to shift the pitch down one
octave, and "1" to shift the pitch up one octave. Press the [–/NO] and [+/YES] buttons simul-
taneously to recall the default setting (different for each voice combination).

F3.5: Reset

button to reset the values. "End" will appear on the display when all functions have been
reset.
26
YDP-101
After selecting "F3. Y ", press the [+/YES] button to engage the dual-mode function sub-
If the Dual mode is not engaged "F3. - " will appear instead of "F3. Y " and the Dual mode
[FUNCTION] button while holding the two dual-mode voice selectors.
• Dual mode function settings are set individually for each voice combination.
NOTE
.....................................................................................................................................
The volume levels of the two voices combined in the dual mode can be adjusted as re-
You can set one voice as the main voice, and another voice as a softer, mixed voice.
.......................................................................................................................................
This function makes it possible to detune the 1st and 2nd dual-mode Voices to create a
Depending on which voices you combine using the dual mode, the combination may sound
..........................................................................................................................................................
This function resets all dual-mode functions to their default values. Press the [+/YES]
.............................................................................................................
...........................................................................................................