Split Point; Split Balance; Right Voice Octave Shift; Split Mode Functions - Yamaha 440 Owner's Manual

Split Mode Functions

470 440
This menu enables you to make various detailed settings
for the Split mode. By changing the split point or other
settings, you can optimize the settings for the songs you
play.
1.
Select the Voices in the Split mode, then call up
the Function mode and select a function
number.
2.
Use the [-/NO] [+/YES] buttons to set the
values.
SHORTCUT:
You can jump directly to the Split mode function
[TEMPO/FUNCTION] button while holding the [SPLIT] button.

Split Point

Set the point on the keyboard that separates the right and
left-hand sections (split point). The pressed key is
included in the left-hand range.
Setting range: The entire keyboard
Default setting: F 2
NOTE
Instead of using the [-/NO] [+/YES] buttons, you can set the split point
by directly pressing the appropriate key on the keyboard.
SHORTCUT:
If the Function mode is not called up, you can change the split point to
any other key by pressing the key while holding the [SPLIT] button.
Example key name indications for split point
High bar indicates
sharp note

Split Balance

The volume level of the two Voices combined in Split
mode can be adjusted as required. You can make this
setting for each combination of Voices individually.
Setting range: 0 – 20 (A setting of "10" produces an equal balance
between the two Split mode Voices. Settings below "10" increase the
volume of the left Voice in relation to the right Voice, and settings above
"10" increase the volume of the right Voice in relation to the left Voice.)
Default setting: Different for each Voice combination.
430 S408 S406 465GP
by pressing the
Low bar indicates
flat note

Right Voice Octave Shift

Left Voice Octave Shift

Shifts the pitch up and down in octave steps for the Right
Voice and Left Voice independently. Change this setting
depending on the note range of the songs you play. You
can make this setting for each combination of Voices
individually.
Setting range: -1, 0, 1
Default setting: Different for each Voice combination

Right Voice Effect Depth

Left Voice Effect Depth

These functions allow you to individually set the depth of
the effect for the left and right Split mode Voices.
Setting range: 0 – 20
Default setting: Different for each Voice combination

Damper Pedal Range

The Damper Pedal Range function determines whether
the damper pedal affects the right Voice, the left Voice, or
both the left and right Voices in Split mode.
Setting range:
ALL (for both Voices)
1 (for the right Voice)
2 (for the left Voice)
Default setting: 1
Reset
Resets all Split mode functions to their default values.
Press the [+/YES] button to reset the values.
Function Parameters — Various Convenient Settings
Detailed Settings
55