Factory Preset Recall; Troubleshooting; Options & Expander Modules - Yamaha Clavinova CLP-880 Owner's Manual

Factory Preset Recall
.All dual mode, split mode, reverb, effect, touch sensitivity, tuning
settings, and the settings affected by the Backup Functions can be
restored to their original factory preset values by holding the C7 key
(rightmost key on the keyboard) while turning the [POWER] switch
ON. This also erases all recorder data, and sets all Backup on/off
settings (F8: CLP-840/820/820S, F9: CLP-880/860) to "OFF".
~
NOTE
I .
The factory setting list
is
found on page 42.
Troubleshooting
If you encounter what appears to be a malfunction, please check the following points before assuming
that your Clavinova is faulty.
1. No Sound When the Power is Turned ON
4. Intermittent Static Noise
Is the AC plug properly connected to the Clavinova
This is usually due to turning ON or OFF a house ­
and an AC wall outlet? Check the AC connection hold appliance or other electronic equipment which
carefully. Is the MASTER VOLUME control turned is fed by the same AC mains line as your Clavinova.
up to a reasonable listening level?
5. Interference Appears On Radio or TV Sets
Also make sure that a pair of headphones is not
Located Near the Clavinova
plugged into the PHONES jack, and that the Local
The Clavinova contains digital circuitry which can
Control (page 35) is ON.
generate radio-frequency noise. The solution is to
2. The Damper Pedal Doesn't Work
move the Clavin ova further away from the affected
If the damper pedal doesn't work, or notes are
equipment, or vice versa.
sustained even when the pedal is not pressed, make
6. Distorted Sound When the Clavinova is
sure that the pedal cord is properly plugged into the
Connected to An External Amplifier/Speaker
main unit (page 66: CLP-820S, page 60: CLP-860/
System
840/820, page 52: CLP-880).
If the Clavinova is connected to a stereo system or
3. The Clavinova Reproduces Radio or TV
instrument amplifier and the sound is distorted,
Sound
reduce the volume of the external equipment to a
!
This can occur if there is a high-power transmitter in level at which the distortion ceases.
Ii
a
your vicinity. Contact your Yamaha dealer.
I
• If
"Sc
n"
appears on the display an internal malfunction has occurred. In this case, contact your
Yamaha dealer .
. I
I
I
Opl'ions
&
Expander Modules
• Options
• Expander Modules
BC-8 Bench DOU-10 Disk Orchestra Unit
A comfortable bench styled to match your Yamaha
A range of MIDI recording and playback func­
Clavinova.
tions, plus Yamaha DOC software, Disklavier
HPE-160 Stereo Headphones
PianoSoft™, and General MIDI/Standard MIDI File
High-performance lightweight dynamic headphones
disk playback
capabilit~.
with extra-soft ear pads.
KC-883 Key Cover
(for the
ClP-820S
only)
A
c-onvp,nip.nt Wl'lV tCl
Ie",,,,,,,
VClllr lepvhCl"rn rjp<>n Clnrl