Yamaha Clavinova CLP-810S Owner's Manual
  1. Manuals
  2. Brands
  3. Yamaha Manuals
  4. Musical Instrument
  5. Clavinova CLP-810S
  6. Owner's manual
Yamaha Clavinova CLP-810S Owner's Manual

Yamaha Clavinova CLP-810S Owner's Manual

Yamaha clavinova clp-810s owner's manual
Hide thumbs Also See for Clavinova CLP-810S:
Table of Contents

Advertisement

Quick Links

IMPORTANT
Check your power supply
Make sure that your local AC mains voltage matches the voltage
specified on the name plate on the bottom panel. In some areas a
voltage selector may be provided on the bottom panel of the main
keyboard unit near the power cord. Make sure that the voltage selec-
tor is set for the voltage in your area. The voltage selector is set at
240V when the unit is initially shipped. To change the setting use a
"minus" screwdriver to rotate the selector dial so that the correct volt-
age appears next to the pointer on the panel.

Advertisement

Table of Contents
loading

Related Manuals for Yamaha Clavinova CLP-810S

Summary of Contents for Yamaha Clavinova CLP-810S

  • Page 1 IMPORTANT Check your power supply Make sure that your local AC mains voltage matches the voltage specified on the name plate on the bottom panel. In some areas a voltage selector may be provided on the bottom panel of the main keyboard unit near the power cord.

  • Page 2: Special Message Section

    SPECIFICATIONS SUBJECT TO CHANGE: The information contained in this manual is believed to be correct at the time of printing. However, Yamaha reserves the right to change or modify any of the specifications without notice or obligation to update existing units.
  • Page 3 • If the bench screws become loose due to extensive long-term use, tighten them periodically using the included tool. Yamaha cannot be held responsible for damage caused by improper use or modi- fications to the instrument. Always turn the power off when the instrument is not in use.

  • Page 4: Table Of Contents

    Thank you for choosing a Yamaha CLP-810S Clavinova. Your Clavinova is a fine musical instrument that employs advanced Yamaha music technology. With the proper care, your Clavinova will give you many years of musical pleasure. Stereo sampling of the acoustic piano and Yamaha’s AWM (Advanced Wave Memory)

  • Page 5: The Control Panel

    2 [VARIATION] selector With the [VARIATION] selector in the OFF position, the CLP-810S produces its normal piano voice. In the ON position, a variation of the piano voice is produced (page 7).

  • Page 6: Music Stand

    Music Stand CLP-810S To raise the music stand: Pull the stand up and toward yourself as far as it will go. Flip down the two metal supports at the left and the right on the rear of the music stand.

  • Page 7: Playing The Clavinova

    The Clavinova offers keyboard touch response, so the volume and timbre of notes played can be controlled according to how “hard” you play the keys. Add Reverb as Required With the [REVERB] control, you can add a desired amount of reverb to the Clavinova’s sound (page 9). REVERB CLP-810S...

  • Page 8: Playing The Demonstration Tunes

    • The demo song data is not transmitted via the MIDI connectors. MASTER VOLUME CLP-810S Select and Start a Demo Tune While simultaneously holding the A-1 and C0 keys, press either C3, D3 or E3 to select and start the corresponding demo tune. Starting with the selected tune, the demo tunes will play in sequence until stopped.

  • Page 9: Reverb

    Soft (Left) Pedal The soft pedal reduces the volume and slightly changes the timbre of notes played while the pedal is pressed. The soft pedal will not affect notes which are already playing when it is pressed. CLP-810S...

  • Page 10: Transposition

    The A-1 and C#0 keys plus keys F#2 through F#3 on the keyboard are used for transposition. CLP-810S Simultaneously press and hold the A-1 and C#0 keys. Press any key between F#2 and F#3 according to the desired amount of transposition.*...

  • Page 11: Tuning

    To restore standard pitch (A3 = 440 Hz), hold the A-1, A#-1 and B-1 keys simultaneously. Press any key between C3 and B3. Release the A-1, A#-1 and B-1 keys. * Standard pitch (A3 = 440 Hz) is set when the [POWER] switch is initially turned ON. CLP-810S...

  • Page 12: Midi Functions

    “plays” the recorded performance in precise detail. The examples given above really only scratch the surface. MIDI can do much, much more. The CLP-810S offers a number of MIDI functions that allows it to be used in fairly sophisticated MIDI systems.

  • Page 13: Local Control On/Off

    Simultaneously press and hold the A-1 and C#0 keys. Press the C6 key to switch the Local Control between OFF and ON. Release the A-1 and C#0 keys. • When the power is initially turned ON, Local Control is set to “ON”. NOTE MIDI Functions CLP-810S...

  • Page 14: Troubleshooting

    (page 22). 3. The Clavinova Reproduces Radio or TV Sound This can occur if there is a high-power transmitter in your vicinity. Contact your Yamaha dealer. 4. Intermittent Static Noise This is usually due to turning ON or OFF a household appliance or other electronic equipment which is fed by the same AC mains line as your Clavinova.

  • Page 15: Midi Data Format

    All Note Off occurs. 6. SYSTEM EXCLUSIVE MESSAGES (Universal System Exclusive) (1) Universal Realtime Message Data format: [F0H] -> [7FH] -> [XnH] -> [04H] -> [01H] -> [ll H] -> [mmH] -> [F7H] CLP-810S...
  • Page 16 End of Exclusive [0nH] -> [ccH] -> [vvH] -> [F7H] = Exclusive status = Yamaha ID = Clavinova ID = CLP-810S ID = Clavinova special control = Control MIDI change (n=channel number) = Control number = Value = End of Exclusive...

  • Page 17: Midi Implementation Chart

    YAMAHA [Clavinova] Model: CLP-810S Function Basic Default Channel Changed 1~16 Default Mode Messages Altered ***************** Note 9~120 Number : True voice ***************** O 9nH, v=1~127 Velocity Note on X 9nH, v=0 Note off After key’s Touch Ch’s Pitch Bender Control Change...

  • Page 18: Keyboard Stand Assembly

    On opening the box you should find the parts shown in the illustration. Check to make sure that all the required parts are provided. CLP-810S Have a Phillips-head (+) screwdriver ready. Open the box and remove all the parts. 5 x 40 mm long gold screws...
  • Page 19 Align the cut corner of the bracket with the corresponding cutouts on the feet. Assemble the side panels (D) and feet (E). Attach the side panels (D) to the pedal box (C). 6 x 20 mm round-head screws CLP-810S...
  • Page 20 Each side of the center panel is attached using two 6 x 16 flat-head screws CLP-810S 6 x 16 mm flat-head screws Attach the center panel (B) to the side pan-...
  • Page 21 • Do not hold the keyboard in any position other than the position shown in the above illustration. • Fingers can become pinched between the main unit and the side panels, be extra careful so as not to drop the main unit. 10 cm 6 x 16 mm flat-head screws CLP-810S...

  • Page 22: Connect The Pedal Cord

    A plug adaptor may be also provided in some areas to match the pin configuration of the AC wall outlets in your area. CLP-810S Cord holder Connect the pedal cord. Pass the pedal cord through the two cord holders on the side...
  • Page 23 Review the assembly procedure and correct any errors. Move the Clavinova to an appropriate location. Tighten all screws. Turn the adjuster so that it is set firmly against the floor. Check the connection. CLP-810S...

  • Page 24: Specifications

    • Specifications and descriptions in this owner’s manual are for information purposes only. Yamaha Corp. reserves the right to change or modify products or specifications at any time without prior notice. Since specifications, equipment or options may not be the same in every locale, please check with your Yamaha dealer.

  • Page 25: Important Safety Instructions

    Please make sure that benches are stable and any optional fixtures (where applicable) are well secured BEFORE using. Benches supplied by Yamaha are designed for seating only. No other uses are recommended. CLP-810S...
  • Page 26 BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU’AU FOND. • This applies only to products distributed by Yamaha Canada Music Ltd. • Ceci ne s’applique qu’aux produits distribués par Yamaha Canada Musique Ltée. regulations does not guarantee that interference will not occur in all installations.
  • Page 27 For details of products, please contact your nearest Yamaha or the authorized distributor listed below. Pour plus de détails sur les produits, veuillez-vous adresser à Yamaha ou au distributeur le plus proche de vous figurant dans la liste suivante. NORTH AMERICA CANADA Yamaha Canada Music Ltd.
  • Page 28 M.D.G., EMI Division © Yamaha Corporation 1998 VZ82600 802POCP3.3-01A0 Printed in Japan...

This manual is also suitable for:

Clp810

Table of Contents