Elite Screens Yard Master 2 Series User Manual

Indoor/outdoor portable projection screen

Hide thumbs Also See for Yard Master 2 Series:

Yard Master 2 Series

Indoor/Outdoor Portable Projection Screen

Thank you for choosing the Yard Master 2 portable projection screen! Please read through this user guide

before utilizing the screen. Correct usage and maintenance will ensure a long product life

Care & Use Instructions

◆ Please be sure to distinguish between the front and back of the screen fabric when setting up the

projection screen. CineWhite (front projection) has a black backing and Wraith Veil (rear projection)

is labeled front, back.

◆ Dust, dirt and scratches on the projection surface will affect the picture quality, please take note of

the points below to prevent that from occurring:

1. Do not touch the projection surface with your hands

2. Do not write or draw on the projection surface

3. Do not use fingers or sharp objects to point on the projection surface; this will damage the

screen material.

4. Use a soft-damp cloth to clean the projection surface; do not use chemical cleaning agents or

alcohol.

5. Use clean water when dampening the cleaning cloth and do not rub against the material to

clean it.

◆After using the screen, disassemble it and store it in the carrying bag provided.

◆To avoid damage and injury, the screen should only be operated by adults.

061114

User's G uide

www.elitescreens.com

Table of Contents

Need help?

Do you have a question about the Yard Master 2 Series and is the answer not in the manual?

Page 1 Yard Master 2 Series Indoor/Outdoor Portable Projection Screen User’s G uide Thank you for choosing the Yard Master 2 portable projection screen! Please read through this user guide before utilizing the screen. Correct usage and maintenance will ensure a long product life Care &...
Page 2 Product Description Design: The aluminum frame is designed to be light weight and easily operated making it easy to carry, assemble and disassemble. Screen Fabric: The screen fabric is attached to the rectangular frame and held in place by several press studs, which ensure an evenly stretched and flat surface.
Page 3 Frame Assembly and Screen Material Attachment 1. Take the folding frame (A) out of the carrying bag (H) and place it on a flat surface. Unfold the longer sections first as shown in Fig.3-4. Fig. 3 Fig. 4 2.
Page 4 9. After using the screen, disassemble the screen and store it in the provided carrying bag (h). To disassemble the screen, follow Fig.19 the user guide procedures in reverse order. For a local Elite Screens contact or Technical Support, please visit www.elitescreens.com 061114 ...