Essex Electronics K1 Series Installation Instructions Manual page 22

d. cont'd.
e. Once all desired User Authorizations have been assigned, enter #
f.
g. If no more Users are to be added, enter * * and return to Step 3,
Notes on Adding New Users:
Auxiliary Device or 2nd or 3rd Door authorization depends on configura-
!
tion of the A and B Outputs. See System Setup on page 12.
If either Output is configured for 2nd or 3rd Door operation and a user is
!
given 4# or 6# Authorization, their User Code will activate the configured
output, not the Main Relay.
24-hour Access requires an external time clock or keyswitch. This allows
!
you to restrict access to Users who are not assigned 24-hour Access. See
Time Clock Input on page 11.
18
Essex Electronics, Inc. | 805.684.7601 | 800.KEY-LESS | fax 805.684.0232 | keyless.com
Code User Authorization
6 3rd Door (see notes)
7 24-hour Access (see notes)
to complete programming for this User.
To program an additional User, return to Step b.
or if you have completed all User Programming, enter * * a
second time to complete programming sequence and reset
system to normal operation.
Keypad Status After Step Completion
Step Beep
a Double
b Double
c Double
d Double
e Double
f Triple
Red LED Green LED
Slow Flash Slow Flash
Slow Flash Fast Flash
Slow Flash Fast Flash
Slow Flash Fast Flash
Slow Flash Fast Flash
Slow Flash Slow Flash