Essex Electronics K1 Series Installation Instructions Manual page 12

c.
You should hear 3 beeps indicating successful configuration
(the RED LED will continue to flash and the GREEN LED will
be solid). If you hear a long error beep, re-enter the configura-
tion number followed by #.
7. Remove power.
8. Remove configuration jumper.
9. Re-apply power.
8
Essex Electronics, Inc. | 805.684.7601 | 800.KEY-LESS | fax 805.684.0232 | keyless.com
To change the illumination on the K1-26 only, enter the
code as follows:
Code Standby Mode
210 # Off (factory default) Off (factory default)
211 # Off
212 # Off
213 # Dim
214 # Dim
Normal Operation
Dim
Bright
Dim
Bright