Dell OptiPlex 3030 All-in-One Owner's Manual page 41

Table 11. Maintenance
Option
Service Tag
Asset Tag
SERR Messages
Table 12. Cloud Desktop
Option
Server Lookup Method
Server Name
Server IP Address
Server Port
Client Address Method
Client IP Address
Description
Displays the service tag of your computer.
Allows you to create a system asset tag if an asset tag is not
already set. This option is not set by default.
Controls the SERR message mechanism. This option is
enabled by default. Some graphics cards require that the
SERR message mechanism be disabled.
• Enable SERR Messages
Description
Specifies how the ImageServer looks up the server address.
• Static IP
• DNS (enabled by default)
NOTE: This field is only relevant when the Integrated
NIC control in the System Configuration group is set to
Enabled with ImageServer.
Displays the name of the server.
Displays the primary static IP address of the ImageServer
with which the client software communicates. The default IP
address is 255.255.255.255.
NOTE: This field is only relevant when the Integrated
NIC control in the System Configuration group is set to
Enabled with ImageServer and when Lookup Method is
set to Static IP.
Displays the primary IP port of the ImageServer, which is
used by the client to communicate. The default IP port is
06910.
NOTE: This field is only relevant when the Integrated
NIC control in the System Configuration group is set to
Enabled with ImageServer.
Specifies how the client obtains the IP address.
• Static IP
• DHCP (enabled by default)
NOTE: This field is only relevant when the Integrated
NIC control in the System Configuration group is set to
Enabled with ImageServer.
Displays the static IP address of the client. The default IP
address is 255.255.255.255.
41