Dell OptiPlex 3030 All-in-One Owner's Manual page 39

Option
Limit CPUID Value
Intel TurboBoost
Table 7. Power Management
Option
AC Recovery
Auto On Time
Deep Sleep Control
Fan Control Override
USB Wake Support
Wake on LAN/WLAN
Description
This field limits the maximum value the processor
Standard CPUID Function will support
• Enable CPUID Limit (Disabled by default)
NOTE: Some Operating system will not
complete installation when the maximum
CPUID Function is greater than 3
Allows you to enable or disable Intel TurboBoost
mode of the processor. This option is enabled by
default.
• Enable Intel TurboBoost - Allows the Intel
TurboBoost driver to increase the performance
of the CPU or graphics processor. Enabled by
default.
Description
Specifies how the computer will respond when AC power is
applied after a AC power loss. You can set the AC Recovery
to:
• Power Off (Default)
• Power On
• Last Power State
Allows you to set the time at which the computer must turn
on automatically. The options are:
• Disabled (Default)
• Every Day
• Weekdays
• Select Days
Allows you to define the controls when Deep Sleep is
enabled.
• Disabled
• Enabled in S5 only
• Enabled in S4 and S5 Enabled
Controls the speed of the system fan. This option is disabled
by default.
• Fan Control Override This option is disabled by default.
This option allows you to enable USB devices to wake the
computer from standby.
• Enable USB Wake Support - This option is enabled by
default.
Allows you to power up the computer from the off state
when triggered by a special LAN/WLAN signal.
• Disabled
39