Installing The System Board - Dell OptiPlex 3030 All-in-One Owner's Manual

5. Remove the system board from the computer.

Installing the System Board

1. Align the system board on the computer.
2. Tighten the screws to secure the system board to the computer.
3. Connect the following cables to the system board:
a. camera cable
b. LVDS cable
c. system fan cable
d. optical-drive cable
e. hard-drive cable
f. hard-drive/optical-drive power cable
g. convertor-board cable
h. touch cable (if available)
i. power-switch cable
j. speaker cable
4. Install:
a. WLAN card
b. heatsink
c. system-board shield
d. VESA bracket
e. memory
f. back cover
g. stand
h. stand cover
5. Follow the procedures in After Working Inside Your Computer.
27