Option
Strong Password
Password Configuration
Password Bypass
Password Change
TPM Security
Computrace
CPU XD Support
Admin Setup Lockout
Description
•
Confirm the new password
Enable strong password - This option is disabled by default.
This field controls the minimum and maximum number of
characters allowed for the admin and system passwords.
•
Admin Password Min
•
Admin Password Max
•
System Password Min
•
System Password Max
By default the minimum characters are set to 4 and
maximum to 32.
Allows you to bypass the System Password and the internal
HDD password prompts during a system restart.
•
Disabled - This option is selected by default.
•
Reboot Bypass
Allows you to determine whether changes to the system and
hard disk passwords are permitted when an administrator
password is set.
•
Allow Non-Admin Password Changes - This option is
enabled by default.
Allows you to control whether the Trusted Platform Module
(TPM) in the system is enabled and visible to the operating
system.
TPM Security - This option is disabled by default.
Allows you to activate, deactivate or disable the BIOS
module interface of the optional Computrace Service from
Absolute Software.
•
Deactivate - This option is disabled by default.
•
Disable
•
Activate
Allows you to enable or disable the execute disable mode of
the processor.
•
Enable CPU XD Support - This option is enabled by
default.
Allows you to enable or disable the option to enter setup
when an admin password is set.
•
Enable Admin Setup Lockout - This option is disabled by
default.
37