Dell OptiPlex 3030 All-in-One Owner's Manual page 35

Option
Date/Time
Table 3. System Configuration
Option
Integrated NIC
SATA Operation
Drives
SMART Reporting
USB Configuration
Description
• Enabled Legacy Options ROMs (Default:
Enabled)
Allows you to set the date and time. The changes
to the system date and time takes effect
immediately.
Description
Allows you to configure the integrated network
controller. The options are:
• Enable UEFI Network Stack
• Disabled
• Enabled
• Enabled w/PXE (Default)
• Enabled w/Cloud Desktop
Allows you to configure the internal SATA hard-
drive controller. The options are:
• Disabled
• ATA
• AHCI (Default)
Allows you to enable or disable the various drives
on-board:
• SATA-0
• SATA-1
Default Setting: All drives are enabled.
Allows you to enable SMART reporting on hard
drives during system startup.
• Enable SMART Reporting - This option is
disabled by default.
Allows you to enable or disable the internal USB
configuration. The options are:
• Enable Boot Support
• Rear USB Ports
– Port 1 (left)
– Port 2 (Center Left)
– Port 3 (Center Right)
– Port 4 (Right)
• Side USB Ports
– Port 1 (Top)
– Port 2 (Bottom)
35