Installation (In-Dash Mounting) - JVC GET0199-001A Instructions Manual

KD-G807
Installation/Connection Manual
GET0200-002A
[EE]
ENGLISH
This unit is designed to operate on 12 V DC, NEGATIVE ground electrical systems. If your
vehicle does not have this system, a voltage inverter is required, which can be purchased at JVC
IN-CAR ENTERTAINMENT dealers.
Parts list for installation and connection
The following parts are provided for this unit.
After checking them, please set them correctly.
A / B
Hard case/Control panel
E
Power cord
H
Handles

INSTALLATION (IN-DASH MOUNTING)

The following illustration shows a typical installation. If you have any questions or require
information regarding installation kits, consult your JVC IN-CAR ENTERTAINMENT dealer or a
company supplying kits.
• If you are not sure how to install this unit correctly, have it installed by a qualified technician.
1
B
4
H
C
*1
C
Sleeve
F
Washer (ø5)
I
Mounting bolt—M5 x 20 mm
K
Battery
CR2025
3
2
* 1 When you stand the unit, be careful not to
damage the fuse on the rear.
* 1
L
Remote controller
•
5
D
Fit the protrusions
outside the unit.
B
1
D
Trim plate
G
Lock nut (M5)
J
Rubber cushion
!
Do the required electrical connections.
J
C
~
@
D
⁄
¤
Bend the appropriate tabs to hold
the sleeve firmly in place.
0104KKSMDTJEIN
EN, RU
Ÿ
I