Troubleshooting - JVC GET0199-001A Instructions Manual

Cd receiver
Table of Contents

Advertisement

What appears to be trouble is not always serious. Check the following points before calling a service
center.
Symptoms
• Sound cannot be heard
from the speakers.
• This unit does not work
at all.
• When "PUSH RESET"
appears on the display.
• SSM (Strong-station
Sequential Memory)
automatic preset does
not work.
• Static noise while
listening to the radio.
• Disc cannot be played
back.
• CD-R/CD-RW cannot be
played back.
• Tracks on the CD-R/
CD-RW cannot be
skipped.
• Disc cannot be ejected.
• Disc sound is sometimes
interrupted.
• Disc cannot be
recognized ("NO DISC"
appears on the display).

TROUBLESHOOTING

Causes
The volume level is set to the
minimum level.
Connections are incorrect.
The built-in microcomputer may
have functioned incorrectly due
to noise, etc.
There is something blocking the
control movement.
Signals are too weak.
The aerial is not connected
firmly.
Disc is inserted upside down.
CD-R/CD-RW is not finalized.
Disc is locked.
You are driving on rough roads.
Disc is scratched.
Connections are incorrect.
No disc in the loading slot.
Disc is inserted incorrectly.
The unit may have functioned
incorrectly.
Remedies
Adjust it to the optimum level.
Check the cords and
connections.
Press the reset button on the
control panel. (Your preset
adjustments will also be
erased.) (See page 2.)
Press the reset button on the
control panel. (See page 2.) If
the reset button does not work,
check the Installation/
Connection Manual (separate
volume). (Ex.: You have used a
longer screw than specified.)
Store stations manually.
Connect the aerial firmly.
Insert the disc correctly.
• Insert a finalized CD-R/
CD-RW.
• Finalize the CD-R/CD-RW
with the component which
you used for recording.
Unlock the disc.
(See page 24.)
Stop playback while driving on
rough roads.
Change the disc.
Check the cords and connections.
Insert a disc into the loading
slot.
Insert the disc correctly.
While pressing CD/CD-CH (for
KD-G801) or CD (for KD-G701),
press and hold SEL (select) for
more than 2 seconds to eject
the disc.
53

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents