Canceling The Display Demonstration - JVC GET0199-001A Instructions Manual

Canceling the display
demonstration
When shipped from the factory, display
demonstration has been activated, and starts
automatically when no operations are done for
about 20 seconds.
• It is recommended to cancel the display
demonstration before you use the unit for the
first time.
To cancel the display demonstration, follow
the procedure below:
1
Press and hold SEL (select) for more
than 2 seconds so that one of the
PSM items appears on the display.
(PSM: see pages 34 and 35.)
2
Select "DEMO MODE" if not shown
on the display.
8
3
Select "DEMO OFF."
DEMO OFF
4
Finish the setting.
To activate the display demonstration, repeat
the same procedure and select "DEMO ON" in
step 3 .
DEMO ON