Radio Operations; Listening To The Radio; Manual Search - JVC GET0199-001A Instructions Manual

RADIO OPERATIONS

Listening to the radio

You can use either automatic searching or manual
searching to tune in to a particular station.
Searching for a station automatically:
Auto search
1
Select the band (FM1 – 3, AM).
(For KD-G801)
Each time you press the button, the band
changes as follows:
FM 1
(F1)
Lights up when receiving an FM stereo
broadcast with sufficient signal strength.
* When "CLOCK DISP" is set to "CLK DISP
ON" (see page 36), the current indication will
soon change to the clock time.
Note:
This receiver has three FM bands (FM1, FM2,
FM3). You can use any one of them to listen to
an FM broadcast.
10
or
(For KD-G701)
FM 2 FM 3 A M
(F2) (F3) (A1)
Selected band appears*.
2
Start searching for a station.
To search for stations of lower frequencies
When a station is received, searching stops.
To stop searching before a station is
received, press the same button you have
pressed for searching.
Searching for a station manually:

Manual search

1
Select the band (FM1 – 3, AM).
(For KD-G801)
Each time you press the button, the band
changes as follows:
FM 1 FM 2
(F1) (F2)
Note:
This receiver has three FM bands (FM1, FM2,
FM3). You can use any one of them to listen to
an FM broadcast.
To search for stations of
higher frequencies
or
(For KD-G701)
FM 3 A M
(F3) (A1)