Radio Operations; Listening To The Radio - JVC KD-S10 Instructions Manual

RADIO OPERATIONS

Listening to the radio

You can use either automatic searching or manual
searching to tune in to a particular station.
Searching a station automatically:
Auto search
1
Select the band (FM 1 – 3, AM).
FM
AM
Selected band appears
Note:
This receiver has three FM bands (FM1, FM2,
FM3). You can use any one of them to listen to an
FM broadcast.
2
Start searching a station.
When a station is received, searching stops.
6
MO
FM1 FM2
FM3
AM
Lights up when receiving an
FM stereo broadcast with
sufficient signal strength
¢ to search
Press
stations of higher
frequencies.
Press 4
to search
stations of lower
frequencies.
CD
AM
RPT RND
MODE SCM
To stop searching before a station is received,
press the same button you have pressed for
searching.
Searching a station manually:
Manual search
1
Select the band (FM 1 – 3, AM).
FM
AM
Note:
This receiver has three FM bands (FM1, FM2,
FM3). You can use any one of them to listen to an
FM broadcast.
2
Press and hold
"M" (manual) starts flashing on
the display.
Selected band appears
FM
SSM
FM1 FM2
FM3
AM
¢ 4
or until