Table 2-2: Rear Panel Component Descriptions - AudioCodes Mediant 2000 Installation Manual

Sip media gateway
Hide thumbs Also See for Mediant 2000:
Table of Contents

Advertisement

Installation Manual
Item #
Label
1
2
ETH
3
TRUNKS (16 spans)
-or-
PSTN (1, 2, 4, or 8
spans)
4
5
100-240~1.5A
or 48V 4A max
Version 6.0

Table 2-2: Rear Panel Component Descriptions

-
RTM locking screws (or RTM latches).
Two 10/100Base-TX, RJ-45 shielded ports. This dual Ethernet
interface provides an Ethernet redundancy scheme (active /
standby), offering protection against Ethernet failure.
The connector depends on the number of required spans:
16 Spans: Two 50-pin female Telco connector (DDK 57AE-
40500-21D) for E1/T1 trunks 1 to 8, and 9 to 16 respectively.
1, 2, 4, or 8 Spans: Up to eight RJ-48c ports, each
supporting an E1/T1 trunk.
Protective earthing screw.
One of the following power interfaces (depending on customer
requirements):
Dual AC power sockets
2-Pin DC connector
Component Description
11
2. Installing the Device
March 2010

Advertisement

Table of Contents
loading

Table of Contents