Chamberlain Elite EL25 Programming Manual page 9

Programming
Page Description of Task
Number
Configure "Strikes and Out" Alarm
104
51
Feature
Enable or Disable Anti-Passback
105 50
Forgiveness at Midnight
Override Telephone Company
109 54
Answering Service
Set a Phone Number's Extension Delay
110 55
Time
111 17
Verify Multi-Unit Number
Dial "0-9" First to Get an Outside Line
113 54
Using a Automated Phone System
115 53
Set Alternative Prefixes
116
56
Change the Visitor Call Response Keys
120 61
Talk through the EL25 Speaker
61
121
Cycle Door
61
122
Latch Door "Open" Until...
123 61
Latch Door "Closed" Until...
124 62
Release Door "Now"
131 62
Cycle Relay "Now"
201 28
Delete ALL
33
202
Delete ALL
203 38
Delete ALL
204 43
Delete ALL
205 48
Delete ALL
206 63
Delete ALL
Press
***
Exiting programming mode allows changes to take effect
The Pound Key (#) must be used as Data Field Separator and to Save Data at the end of the sequence.
Important:
Time must be entered using a 24-hour format (8AM=0800, 3PM=1500 etc. )
2 Short Beeps:
If you make an error during an entry, press the asterisk key (
9, 5, 3, 7, 2, 1,
Directory Codes
Entry Codes
Access Cards
Transmitter Codes
Time Zones
Access Codes from Database
Optional Steps Indicated with a
To enter programming mode from the EL25:
and the 6-Digit Password (2 short beeps will be heard)
Programming input is valid.
Page 8
Factory
Programming Procedure
Setting
104 # (alarm option; 0 = disable, 1 = enable until
relay time expires, 2 = enable until alarm clears) #
Disabled
(relay group, 0000-1111) #
Order of relays is 4321
Enabled
105 # (0 = disable; 1 = enable) #
No
109 # (0 = no; 1 = yes) # Default is "No"
110 # (directory code) # (phone extension delay) #
No Delay
(call forward extension delay) #
111 #
Disabled
113 # (0 = disable; 1 = enable) # (0-9, when enabled) #
115 # (normal-00, mixed-01, asterisk-02, pound-03,
Normal
number-1n) # each unit in chain must have same setting
116 # (activate door 1) # (activate door 2) # (activate
door 3) # (activate door 4) # (call wait toggle) #
*
(extend talk time) # (hang up and deny access) #
120 #
121 # (door 1-4) #
122 # (door 1-4) # (end time = hhmm) #
123 # (door 1-4) # (end time = hhmm) #
124 # (door 1-4) #
131 # (relay 1-4) #
201 # 101010 #
202 # 101010 #
203 # 101010 #
204 # 101010 #
205 # 101010 #
206 # 101010 #
Background, all other steps are Required
1 Long Beep: Input is not valid.
) to begin again.
*