Chamberlain Elite EL25 Programming Manual page 44

Replace a Lost Transmitter:
1 Press
2 Enter Lost Transmitter Number (1-65534). Then (
3 Enter Facility Code (0-255). Then (
4 Enter Sequence Code (0-2). Then (
5 Enter ID Number (0-26). Then (
6 Enter Button Number (1-4). Then (
Example:
1 2
Replaces transmitter number "34432", facility code "3", sequence code "1", ID code "1", and button
"1" activated with one having transmitter number "24425", facility code "2", sequence code "2", ID
number "26" and button "1" activated.
Deactivate a Button on Transmitter and/or Delete Transmitter:
Important:
for each active button. If four buttons are active, you will need to perform this set of steps four times,
selecting a different "Button Number" during each process.
1 Press
2 Enter Transmitter Number (1-65534). Then (
3 Enter Facility Code (0-255). Then (
4 Enter Sequence Code (0-2). Then (
5 Enter ID Number (0-26). Then (
6 Enter Button Number (1-4). Then (
Example:
Deletes transmitter number "34432", facility code "3", sequence code "2", ID code "10" and button
"1". If more buttons are active, the transmitter will not be deleted entirely until the process is
repeated for the other active buttons.
Delete ALL Transmitters:
This will delete
Important:
1 Press
2 Enter
95
Then
)
#
)
#
# )
# )
3 4 5
To delete a transmitter from the database
Then
)
#
# )
# )
)
#
)
#
1
204
ALL
transmitters from unit.
Once you delete the transmitter, you cannot retrieve them unless they are saved in Versa XS.
Then
Then
# ) 7 Enter New Transmitter Number (1-65534). Then (
8 Enter New Facility Code (0-255). Then (
9 Enter New Sequence Code (0-2). Then (
10 10 Enter New ID Number (0-26). Then (
11 11
Enter New Button Number (1-4). Then (
6 7
100
entirely , you must repeat the entire set of steps
Important:
performed for EACH Transmitter
Button or Transmitter.
2 3
Page 43
# )
)
#
)
#
# )
# )
8 9
6
1
Allthroughepsmust be
4 5 6
10 11