Chamberlain Elite EL25 Programming Manual page 38

Add a Group of Cards at Once:
This feature allows you to enter a large number of cards into the system at one time. Individual cards from a
group can be edited later. For example, you have 250 cards that you want to enter into the system so that
every time someone needs a card, you won't have to program the system to individually enter a new card.
1 Press
2 Enter Starting Card Number (1-65534). Then (
3 Enter Ending Card Number (1-65534). Then (
4 Facility Code (0 to 63 or 0-255, depending on card
type). Then ( )
#
5 Card Type (26 or 30). Then (
6 Activate (1) or Deactivate (0). Then (
Example:
1 2
Adds a inactive group of Cards that range between "21500" and "21600", default Facility Code, 30-bit Card Type,
no time restrictions, and valid at all doors.
Notes:
• Group cards must be the same Card Type and have the same Facility Code . In addition, you may also
activate the cards, add a schedule to one or more doors. These options must also be the same.
•
If you don't add a Facility Code or Card Type when adding a new card group, the system will add the
defined default values. For details, see (Default Facility Code, page 39 or Default Card Type, page 39).
85
Replace a Card:
This allows you to replace a lost or stolen card without affecting the other data associated with the card (e.g.,
schedule, door assignment, etc.).
1 Press
2 Enter Lost Card Number (1-65534 ). Then (
Facility Code (0 to 63 or 0-255, depending on
3
Card Type). Then (
Example:
1
Replaces lost Card "17690", with Facility Code "17", 26-bit Card Type, with a New Card "19632", with
Facility Code "0" and 26-bit Card Type.
82
Then
#
# )
)
#
)
#
Factory All Doors = 1 Full Access
Settings
Activate or Deactivate = 1
3
Then
)
#
)
#
2 3
7
Schedule for Door 1 (0 to 63). Then (
0 = Full Restrictions 1 = Full Access
)
8
Schedule for Door 2 (0 to 63). Then (
0 = Full Restrictions 1 = Full Access
9 Schedule for Door 3 (0 to 63). Then (
0 = Full Restrictions 1 = Full Access
10
Schedule for Door 4 (0 to 63). Then (
0 = Full Restrictions 1 = Full Access
5
4
Card Type (26 or 30). Then (
4
5 Enter New Card Number (1-65534). Then (
6
Enter New Facility Code (0 to 63 or 0-255,
depending on Card Type). Then (
7 Enter New Card Type (26 or 30). Then (
Required Step
Optional Step, Press (
4
Page 37
# )
# )
)
#
)
#
Required Step
Optional Step,
Press ( # ) to Skip.
6
7 8
# )
# )
# )
)
#
# ) to Skip.
5 6
9 10
7