Audio Output Settings (For Video Contents) - Panasonic Viera X50D series Operating Instructions Manual

Audio output settings (for video contents)

You can enjoy the multi-channel sound via an amplifier connected to HDMI2 (ARC function) terminal.
● To confirm or change the current sound status
1
Display the menu and Select [Sound]
MENU
Menu Item
SPDIF Selection
Accessing the Internet contents (except: X50K series)
You can access the Internet contents.
●
Using this function requires a broadband internet connection. Dial-up internet connections cannot be used.
●
Ensure the network connections and network settings are completed.
"Network connections" (p. 45), [Network Setup] (p. 46 - 48)
Display [VIERA TOOLS] and select the Internet contents
1
Note
●
Be sure to update the software when a software update notice is displayed on the TV screen. If the software is not
updated, you will not be able to enjoy this function.
You can update the software later manually.
● The Internet contents are operated by their respective service providers, and service may be discontinued either
temporarily or permanently without notice. Therefore, Panasonic will make no warranty for the content or the
continuity of the services.
●
You can hide or reveal icons of internet contents on VIERA TOOLS.
● All features of websites or content of the service may not be available.
●
Some content may be inappropriate for some viewers.
●
Some content may only be available for specific countries and may be presented in specific languages.
●
Depending on the connection environment, the internet connection may be slow or may not be successful.
● Turn the TV off, and then on again when changing or reconnecting the network connection.
● Registration is required to access certain Internet contents. Refer registration steps shown on the screen when
accessing Internet contents feature.
52
(p. 41)
Main Menu
Picture
Sound
Setup
select
access
Adjustments / Configurations (alternatives)
SPDIF: A standard audio transfer file format
Selects the initial setting for digital audio output signal from HDMI2 (ARC function)
terminal [Auto] / [PCM]
[Auto]: Dolby Digital is output as Dolby Digital Bitstream. MPEG is output as
PCM.
[PCM]: Digital output signal is fixed to PCM.
Example: X50D series
[Software Update] in [Network Setup] (p. 48)
2
Select [SPDIF Selection] and set
SPDIF Selection Auto
select
set
Internet contents
[Internet Contents Settings] (p. 29)
select
access