Panasonic Viera X50D series Operating Instructions Manual page 49

■
[WPS(Push button)]
"Auto Tuning" (p. 15)
■
[WPS(PIN)]
Enter the PIN code to the access point, and then select [Connect]
WPS(PIN)
Please register the following PIN codes on the
1) Please press the 'WPS' button on the access
access point.
point until its light flashes.
2) When the light is flashing select 'Connect' on
PIN code : 12345678 TV.
If you are unsure, please check the instruction
Select 'Connect' after entering and saving the
settings on the access point. manual of the access point.
Connect
■
[Search for access point]
"Auto Tuning" (p. 15)
■
[Manual]
You can setup SSID, authentication type, encryption type, and encryption key manually.
Follow the on-screen instructions and set manually.
4
Select [Connection Test] and access to test
Network Setup
Connection Test Access
Connection Test
Check access point connection.
Check acquired IP address.
Check for devices using same IP address.
Check gateway connection.
Check server connection.
Update TV's software (except: X50K series)
Accesses the specific website to update TV's software and search if any software updates are available.
Select [Software Update]
Network Setup
Connection Test
Network Type Wireless
Access Point Settings
IP/DNS Settings
Internet Contents Settings
Software Update Access
MAC Address
12-34-56-78-9a-bc
Note
Network Setup
Connection Test
Network Type Wireless
Access Point Settings
IP/DNS Settings
Internet Contents Settings
Software Update
MAC Address 12-34-56-78-9a-bc
48
select
access
●
Performs automatic testing of the network connection for the TV. (It takes a
while to test.)
: succeeded
The test is successful and the TV is connected to the network.
: failed
Check the settings and connections.
select
access
●
Follow the on-screen instructions.
[MAC Address]
●
MAC address is a unique address that identifies hardware in the network.
(for information only)