Panasonic Viera X50D series Operating Instructions Manual page 29

Menu Item
Speaker Distance to
Wall
MPX
HDMI1 / 2 Input
Reset to Defaults
Off Timer
Eco Navigation
Child Lock
Channel List Edit
Auto Tuning
Manual Tuning
OSD Language
Teletext
Teletext Character
Set
Input Labels
Banner Display
Timeout
Playing Time
Display
28
Adjustments / Configurations (alternatives)
Compensates for the low frequency sound due to the distance between the
speakers and the wall [Over 30cm] / [Up to 30cm]
●
If the back space between the TV and wall is over 30 cm, [Over 30cm] is
recommended.
●
If the back space between the TV and wall is within 30 cm, [Up to 30cm] is
recommended.
Selects multiplex sound mode (if available)
[Stereo]: Use this normally.
[Mono]: When stereo signal cannot be received.
[M1] / [M2]: Available while mono signal is transmitted.
Selects to fit the input signal [Digital] / [Analogue] (p. 68)
[Digital]: When sound is carried via the HDMI cable connection
[Analogue]: When sound is not carried via the HDMI-DVI adaptor cable
connection
●
For HDMI input
Press the OK button to reset the current Sound Mode, [Balance], [Headphone
Volume] and [Surround] to the default settings
Sets the duration of time until the TV automatically goes into Standby mode
[Off] / [15] / [30] / [45] / [60] / [75] / [90] (minutes) (p. 17)
Automatically sets the TV to the most suitable energy-saving mode
●
If you press the OK button, the following items are set as below:
[Eco Mode], [VIERA Link], [Power off Link], [Standby Power Save],
[Power Save] [On]
[Intelligent Auto Standby]
[Auto Standby] [2 hours]
Applies access control for channels or inputs to prevent unwanted access (p. 33)
Skips the unwanted channels or edits channels (p. 31)
Automatically searches for the receivable channels (p. 31)
Searches for the channels manually (p. 32)
Changes language for on-screen displays
Teletext display mode [FASTEXT] / [List] (p. 20)
Selects teletext language font [English] / [CIS] / [E.Europe] / [Persian]
Accesses the input labels list to select the label of each input mode or set to skip
unconnected one for easier identification and selection in [Input Selection] (p. 22)
or banner
● To name each input mode freely, select [User input] and set characters
(maximum 10 characters).
●
To skip the input mode, select [Skip].
Sets how long the Information banner stays on screen
[0 (No display)] / [1] / [2] / [3] / [4] / [5] / [6] / [7] / [8] / [9] / [10] (seconds)
Set to [On] to display a continuous record of time spent using Game mode in the
top right of the screen every 30 minutes [Off] / [On]
● This function is available when [Viewing Mode] is set to [Game].
[On (No reminder)]
(p. 25)