Panasonic Viera X50D series Operating Instructions Manual page 9

Assembly screw (4)
(silver)
M5 × 18
■
Assembling the pedestal
Use the assembly screws
the base securely.
●
Make sure that the screws
●
Forcing the assembly screws the wrong way will strip
the threads.
● "L" or "R" mark is stamped on the bottom of the pole.
A
C -
C - R
Preventing the TV from falling over
Using the fall-prevention screw hole and a screw (commercially available), securely fix the body of the pedestal to the
installation surface.
●
The place where the pedestal is to be fixed should be thick enough and made of hard material.
8
Assembly screw (4)
(black)
M5 × 30
to fasten the pole
are securely tightened.
A
L
D
Pole
●
R: TBL5ZA3311
● L: TBL5ZA3310
■
Securing the TV
to Insert the pole into the TV, and then fasten securely
with the assembly screws
●
Tighten the four assembly screws loosely at first, then
tighten them firmly to fix securely.
●
Carry out the work on a horizontal and level surface.
Screw (not supplied)
Diametre: 3 mm
Length: 25-30 mm
Screw hole
Base
●
TBL5ZX0441
(42" class)
● TBL5ZX0430
(50" class)
.
B