Audio Output Settings - Panasonic Viera TH-P42ST30Z Operating Instructions Manual

Audio output Settings

You can enjoy the multi-channel sound via an amplifier connected to the DIGITAL AUDIO OUT terminal.
•
To confirm or change the current sound status
1
Display the menu
MENU
Item
SPDIF: A standard audio transfer file format
Selects the initial setting for digital audio output signal from the DIGITAL AUDIO OUT
SPDIF and HDMI2 (ARC function) terminals [Auto] / [PCM]
Selection [Auto]: Dolby Digital Plus, Dolby Digital and HE-AAC (48 kHz) multi-channel are output
[PCM]: Digital output signal is fixed to PCM.
66
2
Select [Sound]
Main Menu
Picture
Sound
Timer
Setup
select
access
Adjustments / Configurations (alternatives)
as Dolby Digital Bitstream. DTS is output as DTS. MPEG is output as PCM.
"Confirm or change the current status" (p. 63)
3
Select [SPDIF Selection] and set
Mode
Balance
Headphone Volume
Surround
Auto Gain Control
Volume Correction
Speaker Distance to Wall
SPDIF Selection
Reset Sound Default
Normal
Off
Off
Over 30cm
Auto
Reset
select
access / store