Displaying Pc Screen On Tv - Panasonic Viera X50D series Operating Instructions Manual

Displaying PC Screen on TV

The screen of the PC connected to the TV can be displayed on the TV.
You can also listen to PC sound with the audio cable connected.
●
To connect PC (p. 61)
Display the screen of the PC
1
PC
PC menu setting
● To make settings "How to Use Menu Functions" (p. 24)
Menu Item
R-Gain, G-Gain, B-Gain
R-Cutoff, G-Cutoff,
B-Cutoff
Reset to Defaults
Gamma
Reset to Defaults
Input Resolution
Clock
H-pos
V-pos
Clock Phase
Sync
Reset to Defaults
●
Other items (p. 25 - 29)
Note
●
For HDMI-compatible PC, possible to connect to HDMI terminals (HDMI1 / HDMI2) by using HDMI cable
(p. 68).
● Corresponding signals
● If [H-freq.] or [V-freq.] is shown in red, the signals may not be supported.
Adjustments / Configurations (alternatives)
Adjusts the white balance of bright red / green / blue area
Adjusts the white balance of dark red / green / blue area
Press the OK button to reset to the default White Balance
Switches the gamma curve [S Curve] / [1.8] / [2.0] / [2.2] / [2.4] / [2.6]
●
Please note the numerical values are reference for the adjustment.
Press the OK button to reset to the default Gamma
Switches to a wide view:
VGA (640 × 480 pixels) / WVGA (852 × 480 pixels) / XGA (1,024 × 768
pixels) / WXGA (1,280 × 768 pixels, 1,366 × 768 pixels)
● Options change depending on signals
Set to the minimum level if noise occurs
Adjusts horizontal position
Adjusts vertical position
Eliminates flicker and distortion
●
Adjust after Clock adjustment
●
Set to the minimum level if noise occurs
Chooses another synchronous signal if the image is distorted
[H & V] / [On Green]
[H & V]: by the horizontal and vertical signals from your PC
[On Green]: by the green signal from your PC (if available)
Press the OK button to reset [PC Setup] to the default settings
(p. 70)
35