Displaying Pc Screen On Tv - Panasonic TH-P42X10D Operating Instructions Manual

Displaying PC Screen on TV

The screen of the PC connected to the TV can be displayed on the TV.
You can also listen to PC sound with the audio cable connected.
To connect PC p. 40
¨
z
INPUT
PC
TV
PC menu setting (changed as desired)
Menu Item
W/B High R
W/B High B
Advanced W/B Low R
PC
W/B Low B
Settings
Gamma
Reset to
Defaults
Input
Resolution
Clock
H-pos
PC Setup
V-pos
Clock Phase
Sync
Reset to
Defaults
Other items p. 22 and p. 23
¨
z
Select PC mode
1
PC
Corresponding signals
z
If "H-freq." or "V-freq." is shown in red, the signals may not be supported.
z
To return to TV
TV
¨
White balance of bright red area
White balance of bright blue area
White balance of dark red area
White balance of dark blue area
(S Curve / 2.0 / 2.2 / 2.5)
Press the OK button to reset to the default Picture settings
Switches to a wide view
VGA (640 × 480 / 852 × 480 pixels),
z
XGA (1,024 × 768 / 1,280 × 768 / 1,366 × 768 pixels)
Options change depending on signals
z
Set to the minimum level if noise occurs
Adjusts horizontal position
Adjusts vertical position
Eliminates flicker and distortion
Adjust after Clock adjustment
z
PC sync signal type (H & V / On Green)
H & V : Horizontal and Vertical sync from your PC (Most common sync format)
z
On Green : Sync on Green sync from your PC
Press the OK button to reset to the default Setup settings
p. 44
¨
Adjustments / Configurations (options)
1
2
Set to the minimum level if noise occurs
z
1 and 2
repeatedly adjusted
31