Marker Setting Menu Screen - JVC ViewFinder VF-HP840U Instructions Manual

MARKER SETTING Menu Screen

Settings in bold are factory default settings.
Item
ASPECT TYPE
RATIO When ASPECT
TYPE is set to
AVIDEOB
When ASPECT
TYPE is set to
ACINEMAB
POSITION
ASPECT MARKER
TYPE
SAFETY ZONE
SIZE
CENTER MARK
PAGE BACK
Setting Value
VIDEO This item sets the purpose of the marker.
CINEMA
VIDEO
CINEMA : Aspect for cinema shooting
Note ：
● When the input format is 4:3, ACINEMAB cannot be selected.( [VIDEO] is displayed.)
16:9 This item sets the aspect ratio of the marker. It displays the configured aspect
4:3
ratio of the marker. When set to A16:9+4:3B, the 16:9 and 4:3 marker are
14:9
displayed at the same time.
16:9+4:3
Note ：
● A16:9+4:3B is displayed when the VIDEO FORMAT at the camera is HD
2.35:1
mode.
1:66:1
1:75:1
1:85:1
CENTER This item sets the display position of the marker.
CENTER
C.HEADRM
C.HEADRM
Note ：
● AC.HEADRMB can only be set when [RATIO] is A2.35:1B or A1:85:1B. For
other settings, [CENTER] will be displayed and setting is disabled.
OFF This item sets the marker outside the aspect area.
ON OFF : Cancels the marker outside the aspect area.
ON
Note ：
● When connected to GY-HD250U and [VF SIGNAL] is set to ARGBB at the
camera LCD/VF MENU screen, set SAFETY ZONE at the camera to
AOFFB. Settings at VF will be invalid.
● When camera output is set to BARS, this function is AOFFB during Return
Video display, 1:1 display and when status display is OFF.
LINE This item sets the type of labeling for markers outside the aspect area.
LINE
HALFTONE
HALFTONE
LINE+HALF
LINE+HALF
OFF This item sets the marker inside the aspect area.
OFF : Cancels the marker inside the aspect area.
ON
ON
Note ：
● When connected to GY-HD250U and [VF SIGNAL] is set to ARGBB at the
camera LCD/VF MENU screen, set SAFETY ZONE at the camera to
AOFFB. Settings at VF will be invalid.
● When camera output is set to BARS, this function is AOFFB during Return
Video display, 1:1 display and when status display is OFF.
● The above feature may not function depending on the version of the
camera's software. For details, please consult JVC's authorized dealers.
95 %, This item sets the display percentage for markers inside the aspect area.
93 %, 90 %
88 %, 80 %
This item sets whether to display markers in the center.
OFF : Cancels the center marker.
ON
Note ：
● When connected to GY-HD250U and [VF SIGNAL] is set to ARGBB at the
camera LCD/VF MENU screen, set SAFETY ZONE at the camera to
AOFFB. Settings at VF will be invalid.
● When camera output is set to BARS, this function is AOFFB during Return
Video display, 1:1 display and when status display is OFF.
^
This returns to the [MAIN MENU] screen
Description
: Aspect for TV broadcast shooting
: Sets the display position of the marker at the center of the screen.
: Sets the display position of the marker at the upper side of the screen.
: Displays the marker outside the aspect area.
: Displays the aspect area in lines.
: Displays the image level outside the aspect area in half the
brightness.
: Displays the aspect area in lines and sets outside the area
in half the brightness.
: Displays the marker inside the aspect area.
: Displays the center marker.
13