Functional Overview; Features - Fujitsu Primergy CX250 S2 Operating Manual

2

Functional overview

2.1

Features

This section provides information on the features and technical data of the
PRIMERGY CX250 S2 Server Node. For information on key characteristics and
layout of the system board, see "PRIMERGY CX250 S2 Server Node Upgrade
and Maintenance Manual".
System board
The features of the system board are described in the "D3196-B100 BIOS
Setup Utility for PRIMERGY CX250 S2 Reference Manual" for the firmware.
Slots for expansion cards
The server node can be flexibly expanded via riser card for PCIe 3.0 x16.
Onboard SATA controller
A SATA controller is integrated on the system board; up to four SATA hard disk
drives can be connected to the controller. The LSI Embedded MegaRAID
software (SATA Software RAID) supports RAID levels 0, 1 and 10.
For more information on configuring the controller, see section
SAS/SATA RAID controller" on page
SAS/SATA RAID controller
The server node is available with the following SAS/SATA RAID controllers for
operating the internal SAS/SATA hard disk drives:
– Modular RAID 5/6 controller with "MegaRAID functionality"
(SAS MegaRAID) for SAS1.0 and SAS2.0
RAID levels 0, 1, 10, 1E and 5 are supported for internal hard disk drive
configurations.
I
For more information on configuring the controller, see section
"Configuring the SAS/SATA RAID controller" on page
CX250 S2
47.
Operating Manual
"Configuring the
47.
11