Connecting Devices To The Server Node - Fujitsu Primergy CX250 S2 Operating Manual

5.3

Connecting devices to the server node

The additional connectors available on your server node depend on the
expansion cards installed. For further information refer to the "PRIMERGY
CX250 S2Server Node Upgrade and Maintenance Manual".
The standard connectors are marked with symbols, and some are color-coded:
Figure 4: Connection panel of the server node
1 USB connectors
2 Serial connector COM1
(turquoise)
3 Video connector (blue)
I
Some of the devices that can be connected may require the installation
and setting up of special software (e.g. drivers) (see the documentation
for the connected device).
Ê Connect the desired devices to the server node.
CX250 S2
4 Management LAN connector
5 Right: LAN1 & Shared LAN
Left: LAN2
Operating Manual
Hardware installation
37