D-Link DAP-3220 User Manual page 39

DAP-3220 User's Manual
Home > Advanced Settings > DHCP Server > Static Pool Settings
DHCP Server
Assigned IP:
Assigned MAC
D-Link Wireless 108G Exterior Access Point
Dynamic Host Configuration Protocol assigns IP addresses to
wireless devices on the network. This protocol simplifies network
Control:
management and allows new wireless devices to receive IP
addresses automatically without the need to manually assign IP
addresses.
Select Enable to allow the DAP-3220 to function as a DHCP
server.
Use the Static Pool Settings to assign the same IP address to a
device every time you start up. The IP addresses assigned in the
Static Pool list must NOT be in the same IP range as the Dynamic
Pool. After you have assigned a static IP address to a device via its
MAC address, click Apply; the device will appear in the Assigned
Static Pool at the bottom of the screen. You can edit or delete the
device in this list. .
Enter the MAC address of the device here.
Address:
Using the Configuration Menu
39