D-Link DAP-3220 User Manual page 26

DAP-3220 User's Manual
Auto Channel
Root AP MAC
Root AP SSID: that will serve as the root AP.
Authentication:
D-Link Wireless 108G Exterior Access Point
Select Enable or Disable. Enabling this feature automatically selects
Scan:
the channel that provides the best wireless performance.
Enter the MAC address of the AP in your network that will serve as
Address:
the root AP.
Open System
Shared Key
WPA-Personal
WPA2-Personal
Select Open System to communicate the key across the
network.
Select Shared Key to limit communication to only those devices
that share the same WEP settings.
Select Open System/Shared Key to allow either form of data
encryption.
Select WPA-Personal, WPA2-Personal, or WPA-Auto-Per-
sonal to secure your network using a password and dynamic key
changes.
(No RADIUS Server required).
The Data Rates are Auto, 1Mbps, 2Mbps, 5.5Mbps, 6Mbps, 9Mbps,
11Mbps, 12Mbps, 18Mbps, 24Mbps, 36Mbps, 48Mbps, 54Mbps.
Beacons are packets sent by an access point to synchronize a
network. Specify a beacon interval value. The default (100) is
recommended.
26