Introduction - Induction Dynamics ID1 Owner's Manual

Introduction

Congratulations on your selection of the Induction Dynamics ID1 dual purpose loudspeaker.
In order to provide greater flexibility and cater to listeners' preferences, the ID1 includes
a unique switch on the back side of the speaker cabinet. This toggle switches the lower
crossover in and out, allowing users to operate their speakers as either a 3-way plus subwoofer
(home theater) or as a 4-way (stereo).
The ID1 incorporates exclusive, patented S4X™ crossover and driver-control technology,
which makes possible virtually perfect integration of drivers which are ideal for their intended
frequencies. S4X also provides greatly increased control over frequency response, phase,
and impedance, resulting in superior performance and imaging. Because of S4X technology,
any of Induction Dynamics' speakers can be used to build a custom home theater system.
Your ID1 can be combined with any of our center channel and surround speakers, be they
in-wall, on-wall, or free-standing.
Your ID1 incorporates dual 10" mica-graphite poly cone subwoofers. Induction Dynamics
subwoofers accurately produce bass frequencies clearly and without distortion due to
patented circuitry within the speaker cabinet. The specified deep bass capability is measured
using closed-miked and outdoor ground-plane techniques that are free from measurement
distortion caused by room reflections.
The ID1 is available in Rosewood Gloss, Black Satin, and Black Gloss standard finishes.
Custom paints and stains are also available. Grille fabric is available in 63 room-
complementing colors.
WARNINGS:
WARNING! - SHOCK HAZARD
WARNING! - DO NOT OPEN
NO USER SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED PERSONNEL
Audio Perfection Realized
2
™