Internet Connection Via A Router; Internet Connection With Static Ip - Vivotek IP8151 User Manual

VIVOTEK

Internet connection via a router

Before setting up the Network Camera over the Internet, make sure you have a router and follow
the steps below�
1� Connect your Network Camera behind a router, the Internet environment is illustrated below�
Regarding how to obtain your IP address, please refer to Software Installation on page 10 for
details�
Internet
2� In this case, if the Local Area Network (LAN) IP address of your Network Camera is
192�168�0�3, please forward the following ports for the Network Camera on the router�
■ HTTP port
■ RTSP port
■ RTP port for audio
■ RTCP port for audio
■ RTP port for video
■ RTCP port for video
If you have changed the port numbers on the Network page, please open the ports accordingly
on your router� For information on how to forward ports on the router, please refer to your
router's user's manual�
3� Find out the public IP address of your router provided by your ISP (Internet Service Provider)�
Use the public IP and the secondary HTTP port to access the Network Camera from the
Internet� Please refer to Network Type on page 33 for details�

Internet connection with static IP

Choose this connection type if you are required to use a static IP for the Network Camera�
Please refer to LAN on page 33 for details�
Internet connection via PPPoE (Point-to-Point over Ethernet)
Choose this connection type if you are connected to the Internet via a DSL Line� Please refer to
PPPoE on page 34 for details�
8 - User's Manual
WAN (Wide Area Network ) WAN (Wide Area Network )
Router IP address : from ISP P Router IP address : from ISP
LAN (Local Area Network) LAN (Local Area Network)
Router IP address : Router IP address : 192.168.0.1
Cable or DSL Modem
IP address : 192.168.0.3 P address : 192.168.0.3
Subnet mask : 255.255.255.0 ubnet mask : 255.255.25
Default router : 192.168.0.1 efault router : 192.168.0
IP address : 192.168.0.2
Subnet mask : 255.255.255.0
Default router : 192.168.0.1