Vivotek IP8151 User Manual page 57

■ Enable BLC (Back Light Compensation): Enable this option when the object is too dark or too bright
to recognize� It allows the camera to adjust to the best light conditions in any environment and
automatically give the necessary light compensation�
You can click Preview to fine-tune the image, or click Restore to recall the original settings without
incorporating the changes� When completed with the settings on this page, click Save to enable the
settings and click Close to exit the page.
If you want to configure another sensor setting for day/night/schedule mode, please click Profile to open
the Sensor Settings Profile Settings page as shown below.
Please follow the steps below to setup a profile:
1� Check Enable this profile�
2� Select the applied mode: Day mode, Night mode, or schedule mode� Please manually enter a range of
time if you choose Schedule mode�
3. Configure Exposure settings in the second column. Please refer to last page for detailed information�
4� Click Save to enable the setting and click Close to exit the page.
VIVOTEK
User's Manual - 57