Vivotek IP8151 User Manual page 116

VIVOTEK
daylight_enable
daylight_dstactual
mode
daylight_auto_begi
ntime
daylight_auto_endt
ime
daylight_timezones
updateinterval
restore
reset
restoreexceptnet
116 - User's Manual
<boolean>
<boolean>
string[19]
string[19]
string
0,
3600,
86400,
604800,
2592000
0,
<positive integer>
0,
<positive integer>
<Any value>
Hong Kong, Kuala Lumpur, Singapore,
Taipei
360: GMT 09:00 Osaka, Sapporo,
Tokyo, Seoul, Yakutsk
380: GMT 09:30 Adelaide, Darwin
400: GMT 10:00 Brisbane, Canberra,
Melbourne, Sydney, Guam, Vladivostok
440: GMT 11:00 Magadan, Solomon Is.,
New Caledonia
480: GMT 12:00 Aucklan, Wellington,
Fiji, Kamchatka, Marshall Is.
520: GMT 13:00 Nuku'Alofa
6/6 Enable automatic
in time zone.
6/7 Check if current time is under daylight
saving time.
(Used internally)
6/7 Display the current daylight saving start
time.
6/7 Display the current daylight saving end
time.
6/6 List time zone index which support
daylight saving time.
6/6 0 to Disable automatic time
adjustment, otherwise, it indicates the
seconds between NTP automatic update
intervals.
7/6 Restore the system parameters to
default values after <value> seconds.
7/6 Restart the server after <value>
seconds if <value> is non-negative.
7/6 Restore the system parameters to
default values except (ipaddress,
subnet, router, dns1, dns2, pppoe).
This command can cooperate with other
"restoreexceptXYZ" commands. When
cooperating with others, the system
parameters will be restored to the
default value except for a union of the
daylight saving time