Vivotek IP8151 User Manual page 134

VIVOTEK
autoiris
enableblc
5.10 IR cut control
Group: ircutcontrol (capability.nvideoinprofile > 0)
NAME
mode
daymodebegintime
daymodeendtime
disableirled
bwmode
sensitivity
enableextled
5.11 image setting per channel
Group: image_c<0~(n-1)> for n channel products
NAME VALUE
brightness <product dependent>
saturation <product dependent>
contrast -5 ~ 5
sharpness <product dependent>
hue -5 ~ 5
mode preview,
restore,
save
134 - User's Manual
0~1 4/4
0~1 4/4
VALUE SECURITY
(get/set)
auto, 6/6
day,
night,
di,
schedule
<product dependent>
00:00~23:59 6/6
00:00~23:59 6/6
<boolean> 6/6
<boolean> 6/6
low, 6/6
normal,
high
<boolean> 1/6
SECURITY
(get/set)
4/4
4/4
4/4
4/4
4/4
7/4
set 1 to enable auto iris, set 0 to disable auto iris
Enable backlight compensation
DESCRIPTION
Set IR cut control mode
Day mode begin time
Day mod end time
Enable/disable built-in IR led
(capability.ir > 0)
Switch to B/W in night mode if enabled
Sensitivity of light sensor
Enable/disable external IR led
(capability.extir > 0)
DESCRIPTION
Adjust brightness of image according to mode settings.
Adjust saturation of image according to mode settings.
Adjust contrast of image according to mode settings.
Adjust sharpness of image according to mode settings.
Adjust hue of image according to mode settings.
Preview => Apply the parameters of image without
saving.
Restore => Restore the previous saved image
parameters.
Save => Directly save the adjust image parameters.