Event Setting - Vivotek IP8151 User Manual

5.27 Customized event script
Group: event_customtaskfile_i<0~2>
PARAMETER
name
date
time

5.28 Event setting

Group: event_i<0~2>
PARAMETER
name
enable
priority
delay
trigger
triggerstatus
di
VALUE SECURITY
(get/set)
string[41] 6/7
string[17] 6/7
string[17] 6/7
VALUE SECURITY
(get/set)
string[40] 6/6
0, 1 6/6
0, 1, 2 6/6
1~999 6/6
boot, 6/6
di,
motion,
seq,
visignal,
pir,
recnotify,
audioswitch,
tampering,
iva,
temperature,
vi
<product
dependent>
String[40] 6/6
<integer> 6/6
DESCRIPTION
Custom script identification of this entry.
Date of custom script.
Time of custom script.
DESCRIPTION
Identification of this entry.
Enable or disable this event.
Indicate the priority of this event:
"0" = low priority
"1" = normal priority
"2" = high priority
Delay in seconds before detecting the next event.
Indicate the trigger condition:
"boot" = System boot
"di"= Digital input
"motion" = Video motion detection
"seq" = Periodic condition
"visignal" = Video input signal loss.
"pir" = PIR detection.
"recnotify" = Recording notification.
"audioswitch" = Audio switch.
"tampering" = Tamper detection.
"iva" = IVA trigger.
"temperature" = Temperature
"vi"= Virtual input (Manual trigger)
<product dependent>
The status for event trigger
Indicate the source id of di trigger.
This field is required when trigger condition is "di".
One bit represents one digital input. The LSB indicates
DI 0.
VIVOTEK
User's Manual - 149