Vivotek IP8151 User Manual page 163

auto pan
patrol
stop
zoom wide
tele
stop
zooming wide or tele
zs 0 ~ 6
vx <integer , excluding 0>
vy <integer>
vs 0 ~ 7
x <integer>
y <integer>
videosize <window size>
resolution <window size>
stretch <boolean>
focus auto
far
near
iris auto
open
close
speedlink 0 ~ 4
gaptime 0~32768
return <return page>
Auto pan.
Auto patrol.
Stop camera.
Zoom larger view with current speed.
Zoom further with current speed.
Stop zoom.
Zoom without stopping for larger view or further view with zs
speed, used for joystick control.
Set the speed of zooming, "0" means stop.
The slope of movement = vy/vx, used for joystick control.
Set the speed of movement, "0" means stop.
x-coordinate clicked by user.
It will be the x-coordinate of center after movement.
y-coordinate clicked by user.
It will be the y-coordinate of center after movement.
The size of plug-in (ActiveX) window in web page
The resolution of streaming.
0 indicates that it uses resolution (streaming size) as the range of
the coordinate system.
1 indicates that it uses videosize (plug-in size) as the range of the
coordinate system.
Auto focus.
Focus on further distance.
Focus on closer distance.
Let the Network Camera control iris size.
Manually control the iris for bigger size.
Manually control the iris for smaller size.
Issue speed link command.
The gaptime between two consecutive ptz commands for device.
(unit: ms)
Redirect to the page <return page> after the parameter is
assigned. The <return page> can be a full URL path or relative
path according to the current path. If you omit this parameter, it
will redirect to an empty page.
VIVOTEK
User's Manual - 163